Basic Specifications

• Engineered foundation
• Home owner warranty program
• General Liability and Builders Risk Insurance
• Critical Path inspection performed by independent inspector
• Framing
  • Treated lumber base plates
  • 2x6 studs 16" on center at exterior walls
  • 2x4 studs 16" on center at interior walls
  • Exterior wall sheathing 5/8" 4 ply CDX plywood
  • Ceiling joists and rafters 16" on center
  • Energy efficient foil faced roof decking for composition roof Applications and 5/8" CDX for metal and tile roof applications
  • ¾" Hardi Fascia with 2x6 sub-fascia and vented Hardi Soffit

• Insulation
  • R-19 insulation exterior walls
  • R-11 insulation at selected interior walls for sound control
  • R-38 Blown in attic insulation
  • Air infiltration control with foam and/or caulk at windows, Doors, and plate penetrations

• Drywall
  • 5/8" drywall all ceilings and firewalls nailed and screwed
  • 1/2" drywall wall nailed and screwed
  • Texture samples made for homeowner selection
• High efficiency A/C and Heating equipment either heat pump or gas furnace with options for dual fuel heating and/or variable speed fan coil

• Fireplaces
  • Full masonry
  • Direct vent with gas log set and igniter
• Upper end Devoe or Sherwin Williams paints and lacquers
• Custom built cabinets with solid stock face frames, ¾" plywood boxes, And European hinges. Homeowner and contractor layout and walkthrough For pre-construction drawings.

• Electrical per applicable code jurisdiction. Homeowner and contractor walkthrough to verify location of electrical outlets and switches.

• Security system pre-wire with options for monitored smoke and/or Heat detectors

• Trim and closet walkthrough to verify closet layouts and door swings
• Countertops
  • Granite
  • Marble
  • Tile
  • Silestone, Zodiac
• Water control
  • Floor drains in utility rooms and A/C closets on slab
  • Drain pans and shutoff switches at A/C units in attic